Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Turn ignition switch ON.
Select "SLIDE SW-FR", "SLIDE SW-RR" in "Data monitor" mode with CONSULT-III.

Check sliding switch signal under the following conditions.

MONITOR ITEM CONDITION

Monitor item	Condition		Status
SLIDE SW-FR	Sliding switch (forward)	Operate	ON
SLIDE SW-FR	Sliding switch (forward)	Release	OFF
SLIDE SW-RR	Sliding switch (backward)	Operate	ON
SLIDE SW-RR	Sliding switch (backward)	Release	OFF

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".