FixVault
Home › Infiniti › 2012 › FX50 › Repair and Diagnosis › External Pages › Different car › Section 64 (Power Window Control System) › DTC/Circuit Diagnosis › Power Window Serial Link › Power Window Main Switch › POWER WINDOW MAIN SWITCH : Component Function Check

POWER WINDOW MAIN SWITCH : Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK POWER WINDOW SWITCH OUTPUT SIGNAL

    With CONSULT-III

    Check ("CDL LOCK SW", "CDL UNLOCK SW") in "DATA MONITOR" mode for "POWER DOOR LOCK SYSTEM" with CONSULT-III. Refer to "DOOR LOCK : CONSULT-III FUNCTION (BCM - DOOR LOCK) ".

    MONITOR ITEM CONDITION

    Monitor item Condition
    CDL LOCK SW LOCK : ON
    UNLOCK : OFF
    CDL UNLOCK SW LOCK : OFF
    UNLOCK : ON

    Is the inspection result normal? 

    YES: Power window serial link is OK.

    NO: Refer to "POWER WINDOW MAIN SWITCH : DIAGNOSIS PROCEDURE ".

About FixVault