Work Support
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
Setting change of various setting functions and automatic adjustment of components can be performed.
WORK SUPPORT ITEMS DESCRIPTION CHART
| Work item | DESCRIPTION | Refer to |
|---|---|---|
| Set temperature correction | If the temperature experienced by the passenger is different than the discharge air temperature controlled by the temperature setting, the A/C auto amplifier control temperature can be corrected with regards to the temperature setting. | "TEMPERATURE SETTING TRIMMER " |
| REC memory setting | REC memory function setting can be performed. | "INLET PORT MEMORY FUNCTION (REC) " |
| FRE memory setting | FRE memory function setting can be performed. | "INLET PORT MEMORY FUNCTION (FRE) " |
| Blow setting in FOOT mode | In FOOT mode, the air blow to DEF can be turned ON/OFF. | "FOOT POSITION SETTING TRIMMER " |
| MAX rotation compensation in Pri Air Conditioner | Compressor MAX rotation in Pri Air Condition is compensated. | "SETTING OF COMPRESSOR MAXIMUM ROTATION SPEED DURING PRE AIR CONDITIONING " |
| MAX rotation compensation in IDL | Compressor MAX rotation when vehicle stopped is compensated. | "SETTING OF COMPRESSOR MAXIMUM ROTATION SPEED DURING IDLING " |
| Actuator zero position reset | Zero position reset of air mix door actuator and mode door actuator can be performed. | "WORK PROCEDURE " |