DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press power switch for 1 second under the following conditions.
- Shift position: P
- Brake pedal: Not depressed
- Release power switch and wait 1 second.
- Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE "
NO: INSPECTION END
- Press power switch for 1 second under the following conditions.