FixVault

Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDENSER
    1. Turn power switch OFF.
    2. Disconnect condenser connector.
    3. Check continuity between condenser connector and ground part of condenser.
      CONTINUITY REFERENCE CHART

      Condenser Ground part of condenser Continuity
      Connector Terminal
      D109 1 Not existed
      D202 2
    4. Check continuity between condenser terminals.
      CONTINUITY REFERENCE CHART

      Condenser Continuity
      Connector Terminal Connector Terminal
      D109 1 D202 2 Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace condenser. Refer to "REMOVAL AND INSTALLATION ".