ECM RECOMMUNICATING FUNCTION : Special Repair Requirement

WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Insert the registered Intelligent Key* into key slot, turn ignition switch to "ON".
  *: To perform this step, use the key that is used before performing ECM replacement.
3. Maintain ignition switch in the "ON" position for 5 seconds or more.
4. Turn ignition switch to "OFF".
5. Start engine.
  Can engine be started?
  
  YES: Procedure is complete.
  
  NO: Initialize control unit. Refer to the CONSULT-III Operation Instructions NATS-IVIS/NVIS.