FixVault
Home › Infiniti › 2012 › G37 Base, 2D Convertible › Repair and Diagnosis › Electrical › Body Electrical › Power Control System (Convertible) › Power Distribution System › DTC/Circuit Diagnosis › B2616 Ignition Relay Circuit › Component Inspection

Component Inspection

  1. CHECK IGNITION RELAY
    1. Turn ignition switch OFF.
    2. Remove ignition relay.
    3. Check the continuity between ignition relay terminals.
      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace Ignition relay

      Fig 1: Checking Continuity Between Ignition Relay Terminals
      G04889520Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault