Component Function Check
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HAZARD SWITCH SIGNAL BY CONSULT
CONSULT DATA MONITOR
- Turn power switch ON.
- Select "HAZARD SW" of BCM (FLASHER) data monitor item.
- With operating the hazard switch, check the monitor status.TERMINALS CONTINUITY REFERENCE CHART
Monitor item Condition Monitor status HAZARD SW Hazard switch ON On OFF Off Is the inspection result normal?
YES: Hazard switch circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".