Driving Pattern C

Driving pattern C means operating vehicle as per the following:

The following conditions should be satisfied at the same time:

Engine speed: (Engine speed in the freeze frame data) ±375 RPM

Calculated load value: (Calculated load value in the freeze frame data) x (1±0.1) [%]

Engine coolant temperature condition:

• When the freeze frame data shows lower than 70°C (158°F), engine coolant temperature should be lower than 70°C (158°F).
• When the freeze frame data shows higher than or equal to 70°C (158°F), engine coolant temperature should be higher than or equal to 70°C (158°F).
  NOTE:

  • When the same malfunction is detected regardless of the above vehicle conditions, reset the counter of driving pattern C.
  • When the above conditions are satisfied without detecting the same malfunction, reset the counter of driving pattern C.
  • The 1st trip DTC will be cleared when C counter is counted once without the same malfunction after DTC is stored in ECM.