FixVault
Home › Infiniti › 2012 › M37 Base › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System (With Intelligent Key System) › DTC/Circuit Diagnosis › DTC B26F3: Starter Control Relay › DTC Logic › DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Press push-button ignition switch under the following conditions to start engine.
      • Selector lever: In the P position
      • Brake pedal: Depressed
    2. Wait 2 seconds after engine started.
    3. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

About FixVault