Component Inspection

CHECK SEAT MEMORY SWITCH

Turn ignition switch OFF.
Disconnect seat memory switch connector.

Check continuity between seat memory switch terminals.

Seat memory switch		Condition		Continuity
Terminal		Condition		Continuity
4	1	Memory switch 1	Push	Existed
	1	Memory switch 1	Release	Not existed
	2	Memory switch 2	Push	Existed
	2	Memory switch 2	Release	Not existed
	3	Set switch	Push	Existed
	3	Set switch	Release	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace seat memory switch. Refer to "REMOVAL AND INSTALLATION ".