FixVault

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. CHECK DTC DETECTION 

    With CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Perform self-diagnosis for "ABS".

      Is DTC "C1170" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END