FixVault
Home › Infiniti › 2012 › M37 Base › Repair and Diagnosis › External Pages › Different car › Section 127 (Steering Control System (With 4WAS)) › Removal And Installation › 4WAS Front Control Unit › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Never erase the memory (history) of self-diagnosis results when replacing 4WAS front control unit after diagnosis.
  • Erase the memory of the self-diagnosis results (record) after printing out or recording all the values of "DATA MONITOR".
  1. Turn the ignition switch OFF.
  2. Remove the glove box. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the instrument lower panel RH. Refer to "REMOVAL AND INSTALLATION ".
  4. Disconnect 4WAS front control unit connectors.
    CAUTION: Disconnect 4WAS front control unit connectors 10 minutes after turning the ignition switch OFF.
  5. Remove the bolts of 4WAS front control unit.
  6. Remove the 4WAS front control unit.
About FixVault