Can Diagnostic Support Monitor
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- The communication condition from 4WAS front control unit to 4WAS main control unit and malfunction counter are displayed.
- Error counter displays OK if any malfunction is not detected in the past. If the malfunction is detected, it displays 0. The upper limit of the counters is 39.
| Item | PRSNT | PAST |
|---|---|---|
| TRANSMIT DIAG | OK/UNKWN | OK/0 - 39 |
| 4WAS (MAIN) | OK/UNKWN | OK/0 - 39 |
DISPLAYED RESULT (PRSNT)
- OK: It is normal.
- UNKWN: CONSULT cannot receive (transmit) the data transmitted (received) by the diagnosed unit normally.
DISPLAYED RESULT (PAST)
- OK: It is normal.
- When "0" is displayed: It indicates that the system is presently malfunctioning.
- When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.NOTE: Each time when ignition switch is turned OFF to ON, numerical number increases in 1→2→3...38→39. When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis is erased.