FixVault

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. RECHECK DTC 

    With CONSULT 

    1. Drive at 60 km/h (38MPH) or more for 3 minutes or more.
    2. Perform self-diagnosis for "4WAS(MAIN)/RAS/HICAS.

      Is DTC "C1923" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END