FixVault
Home › Infiniti › 2012 › M37 Base › Repair and Diagnosis › Steering › Power Steering › Steering Control System (With 4WAS) › DTC/Circuit Diagnosis › DTC C1924: Steering Angle Sensor › DTC Logic › DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. RECHECK DTC 

    With CONSULT 

    1. Drive continuously for 10 km (6 mile) or more.
    2. Perform self-diagnosis for "4WAS(MAIN)/RAS/HICAS".

      Is DTC "C1924" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

About FixVault