FixVault
Home › Infiniti › 2012 › M37 Base › Repair and Diagnosis › Steering › Power Steering › Steering Control System (With 4WAS) › Removal And Installation › 4WAS Main Control Unit › Removal and Installation › Removal

Removal and Installation: Removal

CAUTION:
  • Never erase the memory (history) of self-diagnosis results when replacing 4WAS main control unit after diagnosis.
  • Erase the memory of the self-diagnosis results (record) after printing out or recording all the values of "DATA MONITOR".
  1. Turn the ignition switch OFF.
  2. Remove the trunk side finisher (LH). Refer to "TRUNK SIDE FINISHER: REMOVAL AND INSTALLATION ".
  3. Disconnect 4WAS main control unit connectors, 4WAS rear motor relay connector and noise suppressor connectors.
  4. Remove the 4WAS main control unit bolts.
  5. Remove the 4WAS main control unit.
About FixVault