DTC Confirmation Procedure

CAUTION:

" " DIAGNOSIS PROCEDURE "" must be performed before starting "DTC CONFIRMATION PROCEDURE".
Never perform "DTC CONFIRMATION PROCEDURE" before completing the repair, which may cause secondary malfunction.
Always drive vehicle at a safe speed.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

: GO TO 2.
CHECK DTC DETECTION
With CONSULT
1. Start the engine.
2. Select "SLCT LVR POSI" and "GEAR" in "Data Monitor" in "TRANSMISSION".
3. Drive vehicle the following condition.
  SLCT LVR POSI: D
  
  GEAR: 1st through 7th
4. Perform "Self Diagnostic Results" in "TRANSMISSION".
  With GST
  
  Follow the procedure "With CONSULT".
  
  Is "P1730" detected?
  
  YES: Go to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END