USB Connection Function
- Connecting iPod® or USB memory allows the driver to play iPod® music files or USB memory-stored music files, video data, and image viewer data.
- Sound signals of music files stored in iPod® or USB memory are transmitted from the USB connector to the AV control unit. The AV control unit transmits the sound signals to the BOSE amp. and video distributor.
- Sound signals transmitted from the BOSE amp. to each speaker, and sound signals transmitted from the video distributor to headphone via headrest display unit
- Video signals and image viewer file signals are transmitted from the USB connector to the AV control unit. The data and files are displayed on the front display unit screen.
- Video signals are transmitted from the USB connector to the AV control unit. The data and files are displayed on the headrest display unit screen.
- iPod® is recharged when connected to USB connector.
- Only files that meet the following conditions will be played.
| Music file | Video file | Image viewer file | |
|---|---|---|---|
| File format | "MP3", "WMA", "AAC", "M4A" | "DivX", "MPEG4 (ASF)" | "JPEG |
| File extension | ".mp3", ".wma", ".aac", ".m4a" | ".divx", ".afs", ".avi" | ".jpg", ".jpeg" |
| Maximum file size | 2 GB | 2 GB | 2 MB |
NOTE:
- iPod® is a trademark of Apple inc., registered in the U.S. and other countries.
- Image signals cannot be received from iPod®.
- Use the enclosed USB harness when connecting iPod® to USB connector.
- If a video-sound codec combination is not satisfied, its video file may not be played.
- Signals cannot be transmitted to video distributor under the following conditions:
- Only sound signal or only image viewer data is stored in iPod®
- Only sound signal or only image viewer data is stored in USB memory