DTC Confirmation Procedure

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

: GO TO 2.

With CONSULT 

1. Turn the ignition switch OFF to ON.
2. Turn the 4WD shift switch AUTO<==>4H<==>4L<==>4H<==>AUTO.
3. Perform self-diagnosis for "ALL MODE AWD/4WD".

   Is DTC "P182B" detected? 

   YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

   NO: INSPECTION END