FixVault
Home › Infiniti › 2012 › QX56 AWD › Repair and Diagnosis › Transmission › Transfer Case › Removal And Installation › Transfer Control Unit › Removal and Installation › Removal

Removal and Installation: Removal

  1. Turn the ignition switch OFF.
  2. Disconnect negative battery terminal.
    CAUTION: Wait for 5 seconds after turning ignition switch OFF.
  3. Remove the glove box assembly. Refer to "REMOVAL AND INSTALLATION ".
  4. Disconnect the transfer control unit connector.
  5. Move instrument lower cover to backward. Refer to "REMOVAL AND INSTALLATION ".
  6. Remove the transfer control unit.
About FixVault