Condition For Turn On The Warning Lamp
4WD Warning Lamp
- Turns ON when there is a malfunction in 4WD system. 4WD warning lamp indicates the vehicle is in fail-safe mode.
- Also turns ON when ignition switch is turned ON, for the purpose of lamp check. Turns OFF approximately for 1 second after the engine starts if system is normal.
| Condition | 4WD warning lamp |
|---|---|
| Lamp check | Turns ON when ignition switch is turned ON. Turns OFF Approx. 1 second after the engine start. |
| 4WD system malfunction | ON |
| Protection function is activated due to heavy load to transfer assembly. (4WD system is not malfunctioning.) | Quick blinking: 2 times/second (Blinking in Approx. 1 minute and then turning OFF) |
| Large difference in diameter of front/rear tires | Slow blinking: 1 time/2 seconds (Continuing to blink until turning ignition switch OFF) |
| Other than above (system normal) | OFF |
ATP Warning Lamp
When the A/T shift selector is in P position, the vehicle may move if the transfer case in neutral. ATP warning lamp is turned on to indicate this condition to the driver.