FixVault

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
Monitor Item Unit Main Signals Selection From Menu Contents
SET SW "ON/OFF" x x ON/OFF status judged from the setting switch signal.
MEMORY SW 1 "ON/OFF" x x ON/OFF status judged from the seat memory switch 1 signal.
MEMORY SW 2 "ON/OFF" x x ON/OFF status judged from the seat memory switch 2 signal.
SLIDE SW-FR(3) "ON/OFF" x x ON/OFF status judged from the sliding switch (forward) signal.
SLIDE SW-RR(3) "ON/OFF" x x ON/OFF status judged from the sliding switch (backward) signal.
RECLN SW-FR(3) "ON/OFF" x x ON/OFF status judged from the reclining switch (forward) signal.
RECLN SW-RR(3) "ON/OFF" x x ON/OFF status judged from the reclining switch (backward) signal.
LIFT FR SW-UP(3) "ON/OFF" x x ON/OFF status judged from the lifting switch front (upward) signal.
LIFT FR SW-DN(3) "ON/OFF" x x ON/OFF status judged from the lifting switch front (downward) signal.
LIFT RR SW-UP(3) "ON/OFF" x x ON/OFF status judged from the lifting switch rear (upward) signal.
LIFT RR SW-DN(3) "ON/OFF" x x ON/OFF status judged from the lifting switch rear (downward) signal.
MIR CON SW-UP "ON/OFF" x x ON/OFF status judged from the mirror switch (upward) signal.
MIR CON SW-DN "ON/OFF" x x ON/OFF status judged from the mirror switch (downward) signal.
MIR CON SW-RH "ON/OFF" x x ON/OFF status judged from the door mirror remote control switch (passenger side) signal.
MIR CON SW-LH "ON/OFF" x x ON/OFF status judged from the door mirror remote control switch (driver side) signal.
MIR CHNG SW-R "ON/OFF" x x ON/OFF status judged from the door mirror remote control switch (switching to right) signal.
MIR CHNG SW-L "ON/OFF" x x ON/OFF status judged from the door mirror remote control switch (switching to left) signal.
TILT SW-UP "ON/OFF" x x ON/OFF status judged from the tilt switch (upward) signal.
TILT SW-DOWN "ON/OFF" x x ON/OFF status judged from the tilt switch (downward) signal.
TELESCO SW-FR "ON/OFF" x x ON/OFF status judged from the telescoping switch (forward) signal.
TELESCO SW-RR "ON/OFF" x x ON/OFF status judged from the telescoping switch (backward) signal.
FORWARD SW(3) "ON/OFF" x x ON/OFF status judged from the forward switch signal.
WALK-IN SW(3) "ON/OFF" x x ON/OFF status judged from the power walk-in switch signal.
FWD LIMIT SW(3) "ON/OFF" x x ON/OFF status judged from the sliding limit switch signal.
SEAT BELT SW(3) "ON/OFF" x x ON/OFF status judged from the seat belt buckle switch signal.
DETENT SW(1) "ON/OFF" x x The selector lever position "OFF (P position)/ON (other than the P position)" judged from the detention switch signal.
PARK BRAKE SW(2) "ON/OFF" x x The parking brake condition "ON (applied)/OFF (release)" judged from the parking brake switch signal.
STARTER SW "ON/OFF" x x Ignition key switch ON (START, ON)/OFF (ACC, OFF) status judged from the ignition switch signal.
SLIDE PULSE(3) - - x Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.
RECLN PULS(4) - - x Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.
LIFT FR PULSE(4) - - x Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.
LIFT RR PULSE(4) - - x Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.
MIR/SEN RH U-D "V" - x Voltage input from door mirror sensor (passenger side) upward/downward is displayed.
MIR/SEN RH R-L "V" - x Voltage input from door mirror sensor (passenger side) leftward/rightward is displayed.
MIR/SEN LH U-D "V" - x Voltage input from door mirror sensor (driver side) upward/downward is displayed.
MIR/SEN LH R-L "V" - x Voltage input from door mirror sensor (driver side) leftward/rightward is displayed.
TILT SEN "V" - x Voltage input from tilt sensor upward/downward is displayed.
TELESCO SEN "V" - x Voltage input from telescopic sensor forward/backward is displayed.
(1) M/T models display all item except this item.
(2) A/T models display all item except this item.
(3) Only this item is displayed for driver seat without automatic drive positioner system.
(4) It is displayed but is not operated for models with driver seat without automatic driver positioner system.