FixVault
Home › Infiniti › 2013 › G37 Base › Repair and Diagnosis › Body & Frame › Seats › Automatic Drive Positioner (Convertible) › DTC/Circuit Diagnosis › Power Walk-In Switch › Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT.
    3. Check the power walk-in switch signal under the following condition.
      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

About FixVault