Component Function Check

CHECK FUNCTION

Select "SLIDE SW-FR", "SLIDE SW-RR" in "DATA MONITOR" mode with CONSULT.

Check sliding switch signal under the following conditions.

Monitor item	Condition		Status
SLIDE SW-FR	Sliding switch (forward)	Operate	ON
SLIDE SW-FR	Sliding switch (forward)	Release	OFF
SLIDE SW-RR	Sliding switch (backward)	Operate	ON
SLIDE SW-RR	Sliding switch (backward)	Release	OFF

Is the inspection result normal?

YES: Inspection End.

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".