FixVault
Home › Infiniti › 2013 › JX35 AWD › Repair and Diagnosis › Body & Frame › Seats › Automatic Drive Positioner › DTC/Circuit Diagnosis › Tilt Sensor › Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Select "TILT PULSE" in "DATA MONITOR" mode with CONSULT.
    2. Check tilt sensor signal under the following conditions.
      Monitor item Condition Value
      TILT PULSE Steering column Operate (UP-WARD) Change (decrease)
      Operate (DOWN-WARD) Change (increase)
      Release No change

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

About FixVault