Detailed Flow
- COLLECT INFORMATION FROM THE CUSTOMER
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnostic worksheet. Refer to "DIAGNOSTIC WORK SHEET ".
GO TO 2.
- PERFORM SELF-DIAGNOSTIC RESULT
Perform self-diagnostic result. Refer to "CONSULT FUNCTION ".
Are any DTCs displayed?
YES: Refer to "DTC INDEX ".
NO: GO TO 3.
- CHECK SYMPTOM OPERATING CONDITION
Check that the symptom is a normal operating condition. Refer to "DESCRIPTION ".
Is the symptom a normal operating condition?
YES: Inspection End.
NO: GO TO 4.
- CHECK WARNING AND INDICATOR LAMPS OPERATION
Check ABS and brake warning lamps, VDC OFF and SLIP indicator lamps operation. Refer to "SYSTEM DESCRIPTION ".
Is ON/OFF timing normal?
YES: GO TO 5.
NO: Perform warning lamp diagnosis. Refer to "COMPONENT FUNCTION CHECK " (ABS warning lamp), "COMPONENT FUNCTION CHECK " (brake warning lamp), "COMPONENT FUNCTION CHECK " (VDC OFF indicator lamp) or "COMPONENT FUNCTION CHECK " (SLIP indicator lamp).
- PERFORM DIAGNOSIS APPLICABLE TO THE SYMPTOM
Perform diagnosis applicable to the symptom. Refer to "SYMPTOM TABLE ".
GO TO 6.
- FINAL CHECK
Perform self-diagnostic result again, and check that the malfunction is repaired. After checking, erase the self-diagnosis memory. Refer to "CONSULT FUNCTION ".
Inspection End.