FixVault
Home › Infiniti › 2013 › JX35 FWD › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System › DTC/Circuit Diagnosis › DTC B2556: Push-Button Ignition Switch › Component Inspection

Component Inspection

  1. CHECK PUSH-BUTTON IGNITION SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector.
    3. Check continuity between push-button ignition switch terminals.
      Push-button ignition switch Condition Continuity
      Terminal
      4 8 Push-button ignition switch Pressed Yes
      Not pressed No

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".

About FixVault