FixVault
Home › Infiniti › 2013 › JX35 FWD › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System › DTC/Circuit Diagnosis › Hood Switch › Component Inspection

Component Inspection

  1. CHECK HOOD SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect hood switch connector.
    3. Check continuity between hood switch terminals.
      Hood switch Condition Continuity
      Terminal
      1 3 Hood switch Press No
      Release Yes
      2 Press No
      Release Yes

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace hood switch. Refer to "HOOD LOCK: REMOVAL AND INSTALLATION ".

About FixVault