Additional Service When Removing Driver Seat Control Unit: Description
WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
Each function is reset to the following condition when the driver seat control unit is replaced.
| Function | Condition | Procedure | ||
|---|---|---|---|---|
| Memory (Seat, steering, mirror) | Erased | Perform storing | ||
| Entry/exit assist | ON | Perform initialization | ||
| Set slide amount(1) | ||||
| Intelligent Key interlock | Erased | Perform initialization | ||
| Perform storing | ||||
| Seat synchronization | OFF | - | ||
|
||||
NOTE:
Notice that disconnecting the 12V battery when detected DTC are present will erase the DTC memory.