DRIVER SIDE: Component Function Check
WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT.
- Check mirror sensor (driver side) signal under the following condition.
Monitor item Condition Value MIR/SEN LH U-D Door mirror (driver side) Change between
3.4 [V] (close to peak)
0.6 [V] (close to valley)MIR/SEN LH R-L Change between
0.6 [V] (close to left edge)
3.4 [V] (close to right edge)Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DRIVER SIDE: Diagnosis Procedure ".