FixVault

Component Function Check

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Select "TILT PULSE" in "Data monitor" mode with CONSULT.
    2. Check tilt sensor signal under the following conditions.
    Monitor item Condition Value
    TILT PULSE Steering column Operate (up) Change (increase)(1)
    Operate (down) Change (decrease)(1)
    Release No change(1)
    (1) The value at the seat position attained when the 12V battery is connected is considered to be 32768.

    Is the indication normal? 

    YES: INSPECTION END

    NO: Perform diagnosis procedure. Refer to "Diagnosis Procedure ".