FixVault
Home › Infiniti › 2013 › M35h › Repair and Diagnosis › External Pages › Different car › Section 4 (Hybrid Control System) › DTC/Circuit Diagnosis › DTC P1805: Brake Switch › Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM COMPONENT FUNCTION CHECK

    ◦ With CONSULT

    1. Turn ignition switch ON.
    2. Select "STOP LAMP SW" in "DATA MONITOR" mode of "EV/HEV" using CONSULT.
    3. Check that monitor indication as per the following condition.
      Monitor item Condition Indication
      STOP LAMP SW Brake pedal Slightly depressed ON
      Fully released OFF

    ⓧ Without CONSULT

    1. Turn ignition switch OFF.
    2. Check for stop lamp illumination as per the following condition.
      Brake pedal Stop lamp
      Slightly depressed Illuminated
      Fully released Not illuminated

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Proceed to "DIAGNOSIS PROCEDURE ".

About FixVault