FixVault

Component Inspection (Condenser)

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDENSER
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
      Fig 1: Checking Gap Between Edge Of Spark Plug And Grounded Metal Portion
      G08255751Courtesy of NISSAN NORTH AMERICA, INC.
      Terminals Resistance (MΩ)
      1 and 2 Above 1 [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace condenser.