FixVault
Home › Infiniti › 2013 › M35h › Repair and Diagnosis › Steering › Power Steering › Steering Control System › DTC/Circuit Diagnosis › DTC C1607, C1608: Power Steering Control Module › DTC Logic › DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    With CONSULT 

    1. Set the vehicle to READY state or start the engine.
    2. Perform "EPS" self-diagnosis.

      Is DTC "C1607" or "C1608" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

About FixVault