FixVault
Home › Infiniti › 2013 › M37 Base › Repair and Diagnosis › External Pages › Different car › Section 71 (Engine Control System - Component Testing & Removal And Installation) › Removal And Installation › Fuel Pump Control Module (FPCM) › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel house finisher (RH). Refer to "TRUNK SIDE FINISHER: REMOVAL AND INSTALLATION ".
  2. Disconnect fuel pump control module (FPCM) connector.
  3. Remove mounting bolts and then remove fuel pump control module (FPCM).
About FixVault