Calibration Of DECEL G Sensor: Description

Decel G sensor calibration must be performed when the following operation is performed.

• Removal and installation or replacement of yaw rate/side/decel G sensor
• Replacement of A/T assembly
• Replacement of control valve & TCM
• Replacement of ABS actuator and electric unit (control unit)
  CAUTION: After removing/replacing the yaw rate/side/decal G sensor or replacing the ABS actuator and electric unit (control unit), the decel G sensor of the ABS actuator and electric unit (control unit) must be calibrated first. Refer to "DESCRIPTION ".