FixVault

Input/Output Signal Chart

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor
Camshaft position sensor
Engine speed(1) Air conditioner cut control IPDM E/R

A/C relay

Compressor
Engine coolant temperature sensor Engine coolant temperature
Accelerator pedal position sensor Accelerator pedal position
Battery Battery voltage(1)
Refrigerant pressure sensor Refrigerant pressure
Power steering pressure sensor Power steering operation
A/C auto amp. A/C ON signal(2)
A/C evaporator temperature(2)
Target A/C evaporator temperature(2)
Blower ON signal
Combination meter Vehicle speed(2)
(1) The ECM determines the start signal status by the signals of engine speed and battery voltage.
(2) This signal is sent to ECM via the CAN communication line.