Maintenance Service Reminder Reset - Procedure 12

1. Turn the ignition key to RUN position without starting the engine. If your car has a Smart key button, press the START button twice without touching the brake pedal.
2. There are two buttons on the top right of the instrument cluster. Press the left button (A - see Fig 1) until you see the SETTING screen.
3. Highlight MAINTENANCE by using the right button (B) and press the left button (A) to enter.
4. Select OIL and press the (A) button to enter.
5. Select the mileage by pressing the (B) button once and then press (A) to reset.

Fig 1: Identifying Display Contols

Courtesy of NISSAN MOTOR CO., U.S.A.