FixVault
Home › Infiniti › 2013 › QX56 AWD › Repair and Diagnosis › External Pages › Different car › Section 308 (Security Control System (Except CROSSCABRIOLET)) › Removal And Installation › Push-Button Ignition Switch › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument stay cover LH. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the push-button ignition switch (1) from instrument stay cover LH, after removing pawl (A). Press push-button ignition switch (1) back to disengage from instrument stay cover LH (2).
    Fig 1: Identifying Push-Button Ignition Switch, Pawl And Instrument Stay Cover LH
    G05890571Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault