Additional Service When Removing Battery Negative Terminal: Description

Initialize the system if any of the following work has been done.

• When control unit replaced.
• Electric power supply to power window switch or motor is interrupted by blown fuse or disconnection and connection of the negative terminal of battery, etc.
• Removal and installation of regulator assembly.
• Power supply to the power window main switch or power window motor is cut off by the removal of battery terminal or if the battery fuse is blown.
• Disconnection and connection of power window main switch harness connector.
• Removal and installation of motor from regulator assembly.
• Operation of regulator assembly as an independent unit.
• Removal and installation of door glass.
• Removal and installation of door glass run.
• The following specified operations can not be performed under the non-initialized condition.
• Auto-up operation
• Anti-pinch function