Work Procedure

WARNING: This page is about a different variant/trim than selected.

PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS
Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs.

Refer to "HPCM: WORK PROCEDURE ".

: GO TO 2.
PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".

Refer to "WORK PROCEDURE ".

: GO TO 3.
PERFORM CLUTCH 1 POSITION LEARNING
Perform "CLUTCH 1 POSITION LEARNING ".

Refer to "WORK PROCEDURE ".

: END