FixVault
Home › Infiniti › 2014 › Q70 5.6, AWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Hybrid Control System) › DTC/Circuit Diagnosis › DTC P062F: Control Module › Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK 12v BATTERY 

    Check 12v battery. Perform "WORK FLOW ".

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Charge or replace 12v battery. Refer to "REMOVAL AND INSTALLATION ".

  2. CHECK INTERMITTENT INCIDENT 

    Perform "INTERMITTENT INCIDENT ".

    Is the inspection result normal? 

    YES: GO TO 3.

    NO: Repair or replace error-detected parts.

  3. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Erase DTC.
    2. Perform DTC confirmation procedure. Refer to "DTC LOGIC ".

      Is DTC P062F detected again? 

      YES: Replace HPCM. Refer to "REMOVAL AND INSTALLATION ".

      NO: INSPECTION END

About FixVault