FixVault
Home › Infiniti › 2014 › Q70 5.6, AWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 65 (Power Control System (Power Distribution System) (Hybrid)) › System Description › System › Power Distribution System › Fail-safe › Fail-Safe Control By DTC

Fail-Safe Control By DTC

WARNING: This page is about a different variant/trim than selected.

BCM performs fail-safe control when any DTC are detected.

Display contents of CONSULT Fail-safe Cancellation
B2192: ID DISCORD BCM-ECM(1) Inhibit setting the vehicle to READY Erase DTC
B2193: CHAIN OF BCM-ECM(1) Inhibit setting the vehicle to READY Erase DTC
B2195: ANTI-SCANNING Inhibit setting the vehicle to READY Ignition switch ON → OFF
B2196: DONGLE NG Inhibit setting the vehicle to READY Erase DTC
B2198: NATS ANTENNA AMP Inhibit setting the vehicle to READY Erase DTC
B26F1: IGN RELAY OFF Inhibit setting the vehicle to READY When the following conditions are fulfilled
  • Ignition switch ON signal (CAN: Transmitted from BCM): ON
  • Ignition switch ON signal (CAN: Transmitted from IPDM E/R): ON
B26F2: IGN RELAY ON Inhibit setting the vehicle to READY When the following conditions are fulfilled
  • Ignition switch ON signal (CAN: Transmitted from BCM): OFF
  • Ignition switch ON signal (CAN: Transmitted from IPDM E/R): OFF
B26F7: BCM Inhibit setting the vehicle to READY by Intelligent Key system When room antenna and luggage room antenna functions normally
(1) "ECM" is indicated on CONSULT display, however this means HPCM on this vehicle.
About FixVault