FixVault
Home › Infiniti › 2014 › QX50 Base, AWD › Repair and Diagnosis › Transmission › Transfer Case › Removal And Installation › AWD Control Unit › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the glove box assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect AWD control unit harness connector.
  3. Remove AWD control unit (1) mounting nuts.
    Fig 1: Locating AWD Control Unit Mounting Nuts
    G05218998Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove AWD control unit.
About FixVault