| ABS actuator and electric unit (control unit) |
Motor/accumulator assembly |
"ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) " |
| Motor relay |
| Actuator relay (main relay) |
| ABS IN valve |
| ABS OUT valve |
| Cut valve 1 |
| Cut valve 2 |
| Suction valve 1 |
| Suction valve 2 |
| Control pressure sensor |
| Accumulator pressure sensor |
| Master cylinder pressure sensor |
| Wheel sensor |
"WHEEL SENSOR AND SENSOR ROTOR " |
| Stop lamp switch |
"STOP LAMP SWITCH " |
| Steering angle sensor |
"STEERING ANGLE SENSOR " |
| Yaw rate/side/decel G sensor |
"YAW RATE/SIDE/DECEL G SENSOR " |
| Brake fluid level switch |
"BRAKE FLUID LEVEL SWITCH " |
| Parking brake switch |
"PARKING BRAKE SWITCH " |
| VDC OFF switch |
"VDC OFF SWITCH " |
| ECM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Accelerator pedal position signal
- Engine speed signal
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
- Target throttle position signal
|
| TCM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Shift position signal
- Current gear position signal
|
| Transfer control unit |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
|
| ABS warning lamp |
"SYSTEM DESCRIPTION " |
| Brake warning lamp |
| VDC warning lamp |
| VDC OFF indicator lamp |