FixVault
Home › Infiniti › 2015 › Q40 AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (Introduction) › Removal And Installation › Control Rod › Removal And Installation › Removal

Removal And Installation: Removal

  1. Shift the selector lever to "P" position.
  2. Remove control rod from A/T shift selector assembly. Refer to EXPLODED VIEW  (2WD) or EXPLODED VIEW  (AWD).
  3. Remove manual lever from A/T assembly.
  4. Remove control rod from manual lever.
  5. Remove insulator and collar from manual lever.
About FixVault