Component Function Check
- CHECK MIRROR SWITCH FUNCTION
- Turn ignition switch ON.
- Select "MIRCONSW-UP/DN", "MIRCONSW-RH/LH" in the "DATA MONITOR" mode using CONSULT.
- Check mirror switch signal under the following conditions.
Monitor item Condition Status MIR CON SW-UP/DN When operating the mirror switch up or down side. ON Other than above. OFF MIR CON SW-RH/LH When operating the mirror switch right or left side. ON Other than above. OFF Is the inspection result normal?
YES
Mirror switch function is OK.
NO
Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .