Component Function Check

CHECK FUNCTION

Turn ignition switch ON.
Select "SLIDE PULSE" in "Data monitor" mode with CONSULT.
Check sliding sensor signal under the following conditions.

Monitor item	Condition		Valve
SLIDE PULSE	Seat sliding	Operate (forward)	Change (increase)^*1
		Operate (backward)	Change (decrease)^*1
		Release	No change^*1

^*1 : The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES

INSPECTION END

NO

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .