Component Function Check

1. Turn ignition switch ON.
2. Select "TILT SW-UP", "TILT SW-DN" in "Data monitor" mode with CONSULT.
3. Check tilt switch signal under the following conditions.

   Monitor item	Condition		Status
   TILT SW-UP	Tilt switch (up)	Operate	ON
   		Release	OFF
   TILT SW-DN	Tilt switch (down)	Operate	ON
   		Release	OFF

Is the indication normal?

YES 

INSPECTION END

NO 

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .